Armada

Centrifuga and casting

Centrifuga and casting

Big Size Kerr Type Centrifuge (Centrifugal Separator)

Function under centrifugal system. Availability for  adjustment convenient to mass weight of cuff and metal. An ideal solution for casting applications without causing any metal squandering, as well as for porcelain mouldings of crown, bridge and skleton applications. The first acceleration rate of a new device is of 1,5 turn. In time this rate can be raised up to 3 turns. All kinds and types of spare parts are available under the guarantee of our Firm.



Programix 25/50/100B 

  • High thermal yield, reducced energy consumption.
  • Compact size.
  • Modular electronic panel.
  • Protection against corrosion (electrogalvanized steel and epoxy paint).
  • Stainless steel door.
  • Monobloc cast ceramic muffle.
  • Maximum temperature in continuous service: 1050 °C
  • Maximum temperature at peak: 1150 °C
  • Time programming: 0 to 100h
  • Temperature rise with regulated control: 1 to 15 °C/min
  • Temperature rise full power position: 16 °C +/min
  • Program regulation 0 to 19: 3 stages
  • Program regulation 20 to 29: 6 stages
  • Electric power supply: 230V, 50/60Hz
  • Nominal power: 2000W
  • Smoke extract. connection: 230V
  • Furnace dimensions Height / Width / Depth: 500 x 390 x 440 mm
  • Chamber dimensions Height / Width / Depth: 120 x 170 x 210 mm
  • Number of rings (Diam. 80, Length 55 mm): 4 to 6
  • Weight: 34kg


DM4

Advantages

  • The pipe heating system is more efficient compared to the traditional muffle system
  • Low energy consumption
  • Greater dependability over time
  • Lighted LED display makes using this machine quick and easy
  • Possibility of modifying a program while is running
  • 1-year warranty

Characteristics

  • Pipe heating system: the resistors are housed inside the refractor pipes
  • Electronic microswitch: detects the opening of the hatch, interrupting the power supply to the resistors
  • Preset aspirator command to allow release of fumes
  • Possibility of memorie up to 10 different cycles each with up to 4 positions
  • Electronic temperature control with microprocessor  allows the following parameters to be set for each program:
    • temperature
    • maintenance temperature
    • Speed at which temperature rises (expressed in °C/min)
    • Extractor OFF temperature
  • Automatic management of the extractor depending on program
  • Delayed start with the possibility of setting the day and time of furnace activity
  • Maximum working temperature 1100 °C