Armada

Sanding devices

Sanding devices


SAND S24R Dual-module sandblasting machine with recycle

Advantages

  • Excellent visibility and lighting inside the chamber
  • Completely pneumatic
  • Great dependability and low maintenance for a minimum investment cost
  • 1-year warranty

Characteristics

  • Equipped with two cylinders with a usable capacity of approximately 0.5 litres each
  • Adjustable pressure with pressure regulator and relative readable
  • Two handpieces with nozzles (0.8 mm and 1.3 mm respectively) ready to work with aluminium oxide/ glass beads
  • Air pumping system within the cylinders which allows the grit to exit completely from the nozzles
  • Selector for which cylinder to be used inside the chamber
  • Pedal control
  • Power supply plug and exit pipe to connect to the extractor
  • Protective sheet placed on closure window
  • Recycling system, equipped with ø 3 mm tungsten carbide nozzle, which allows the material deposited on the bottom to be reused for rough-shaping operations

 

Sand Blast Machine With Unique Process Compartment

Provides the cleaning of the crowns, bridges, skeletons porcelain and metal revetments. Thanks to its special pedal, it provides pressurized air savings. Thanks to special GB03 diamond nozzle, it offers a long service life. All kinds and types of spare parts are available.


Sand Blast Pen

Thanks to its special diamond pen point provide the wiping off of theoxide layer in your works with sensible attachment. Polishes thesurface without causing any wearing to metal. In  pressed porcelain technology provides the wiping off of the revetment without causing any wearing to porcelain. Provides the sanding with 250 μ grain size aluminium oxide in areas inaccesibles by sand with thick grains. Adjustable from 0,5 to 6 bar pressure level. Manufactured according to most recent technology. All kinds and types of spare parts are available under the guarantee of our Firm.


Sand Blast Pen Of Precision

Thanks to its special diamond pen point provide the wiping off ofthe oxide layer in your works with sensible attachment. Polishes the surface without causing any wearing to metal. In  pressed porcelain technology provides the wiping off of the revetment without causing any wearing to porcelain. Provides the sanding with 50-250 μ grain size aluminium oxide in areas inaccesibles by sand with thick grains. Adjustable from 0,5 to 6 bar pressure level. Manufactured according to most recent technology. All kinds and types of spare parts are available under the guarantee of our Firm.


Sand Blast Machine With Two Process Compartments

Provides the cleaning of crown bridges, skeletons porcelain and metal revetments by aluminium oxide under pressurized air. Provided with two compartments, one being for rough sanding and the other for fine sanding processes. Thanks to special GB03 diamond nozzle, offers a long service life. All kinds and types of spare parts are available under the guarantee of our Firm.

 


Syntetic abrasive

 

Synthetic Abrasive – White and Brown Synthetic Abrasive

High – Quality Synthetic Abrasive Consisting of Aluminium Oxide. Does not cause silicosis.

Long endurance of the grit, minimum attrition extremely hard quality, highly resistant to abrasion. For the removal of oxide films and investment compound residues on dental alloys.

• Sharp-Edged grains
• Superior hardness
• High loadbearing capacity
• Excellent chemical stability